2-Bay Shelving
Open adjustable shelving for tools, bins, and everyday consumables.
- Load / shelf
- 75 kg
- Material
- Powder-coat steel
- Part
- RC-SH2
Van Shelving Systems Built for Electricians
US Trade · ElectriciansConduit, spools, testers, and hundreds of small parts, all in their place. RolaCase van shelving keeps your rig organized so the right connector is in your hand in seconds, not buried in a bin.
Find Gear For Your VanPick your van
Why Electricians Choose RolaCase
Built Around How Electricians Work
Your van carries a full electrical inventory in a tight space. RolaCase modular steel shelving is laid out for the way you actually work: fast-moving small parts up front, conduit and reels secured for transit, and testers protected from the day-to-day knocks. Everything mounts to your van and stays put on rough roads.
Tools & Equipment
Keep the gear you reach for every job upright, contained, and easy to grab between sites.
Parts & Consumables
Bins and drawers keep parts, fittings and stock from shifting on the move and quick to restock.
Secure Storage
Lockable cabinets keep valuable tools and materials safe overnight and on site.
Built to Your Van
Sized to fit the selected van, wheelbase and roof height, so it mounts without on-site modification.
Vehicle Fitment
View All
Fitted to Your Van
RolaCase systems are configured to the make, model, and wheelbase you drive, so the shelving lines up with your van's mount points and cargo space. Tell us your vehicle and we will match a layout to it.
Starting Points
All Packages
Electrician Van Packages
Every fitout is built to your van and your workload. These package starting points give you a base to build from, and we adjust the mix of drawers, shelves, and bins to suit how you run your day.
Basic Van Shelving Packages
One-side shelving with bulkhead. A solid, affordable starting fit-out.
America's Most Popular Bin Package
Shelving plus parts bins, the setup most crews choose.
General Van Shelving Packages with Bulkhead
Both-side shelving with bulkhead for a fully kitted work van.
Outfitting a Fleet of Electricians
Running more than one van? We can standardize a layout across your whole fleet so every tech opens the same drawer to the same part. Consistent setups mean faster restocks, quicker onboarding, and less time hunting for gear. Talk to us about a repeatable fitout for your team.
Talk to us about fleet
Packages by Fit
Choose Your Setup
Pre-configured trade packages, from a starter run to a full mobile workshop. Pick your van above and each one fills with the parts that fit.
3-Drawer Module
Lockable drawers for hand tools and the parts you cannot lose.
- Drawers
- 3, ball-bearing
- Lock
- Keyed
- Part
- RC-DR3
Bulkhead Panel
Separates the cargo area from the cab for a safer, quieter drive.
- Fit
- Van bulkhead
- Material
- Powder-coat steel
- Part
- RC-SH2
3-Bay Shelving
More shelf runs for a bigger inventory of parts and consumables.
- Load / shelf
- 75 kg
- Material
- Powder-coat steel
- Part
- RC-SH2
3-Drawer Module
Lockable drawers for hand tools and the parts you cannot lose.
- Drawers
- 3, ball-bearing
- Lock
- Keyed
- Part
- RC-DR3
Long-Stock Carrier
Keeps lengths of conduit, timber and trunking secure and easy to pull.
- Capacity
- Up to 3 m
- Mount
- Side wall
- Part
- RC-SH2
Parts Bin Wall
Open bins keep small parts and fixings sorted and within reach.
- Mount
- Side wall
- Material
- Powder-coat steel
- Part
- RC-SH2
Both-Side Shelving
Full shelving runs down both walls for a completely kitted work van.
- Load / shelf
- 75 kg
- Material
- Powder-coat steel
- Part
- RC-SH2
3-Drawer Module
Lockable drawers for hand tools and the parts you cannot lose.
- Drawers
- 3, ball-bearing
- Lock
- Keyed
- Part
- RC-DR3
Long-Stock Carrier
Keeps lengths of conduit, timber and trunking secure and easy to pull.
- Capacity
- Up to 3 m
- Mount
- Side wall
- Part
- RC-SH2
Case Cabinet
Modular lockable cabinet keeps kits and consumables sorted and portable.
- Lock
- Keyed
- Mount
- Bulkhead
- Part
- RC-DR3
The RolaCase Difference
Why Electricians Trust RolaCase
A shelving system is only worth it if it survives the job and adapts as your work changes. Here is what sets a RolaCase fitout apart.
Heavy-Duty Storage SystemsBuilt for equipment, supplies, and daily jobsite use.
Modular Fit-Out OptionsConfigure shelving, drawers, and accessories around the way your crew works.
Designed for Commercial VansOrganized layouts for the vehicles and setups trade crews rely on.
Made in Our Own FactoryPressed, welded and built in-house since 1982.
Built for the TradeModular steel shelving designed for working electricians
Real Van Setups
View All Products
See Electrician Setups in Action
Conduit Secured for Transit
Small Parts Sorted
Cable Reels in Their Place
Testers Protected
Lockable Drawers
A Full Rig, Organized
Storage That Fits the Trade
Storage for Every Electrical Run
From service calls to full rough-ins, your van needs to carry a lot without turning into a mess. These are the four storage zones we build around for electricians.
Compare the Range
Which Setup Fits Your Run
Three fit-out tiers, from a single-side starter run to a full both-side mobile workshop. Every tier is sized to your exact van.
| The Range | Starter Single-side run | Most Popular Pro Both-side fit | Master Mobile workshop |
|---|---|---|---|
| Adjustable shelvingReconfigure shelf heights on the fly | |||
| Lockable drawersKeyed ball-bearing drawer modules | |||
| Fold-flat worktopBench that stows against the wall | – | ||
| Both-side fit-outStorage down both walls of the van | – | ||
| Conduit carrierSecure tubes for conduit and trunking | – | ||
| Overhead / roof rackLong-length gear stored up top | – | – | |
| Configure | Configure | Configure |
- Adjustable shelving
- Lockable drawers
- –Fold-flat worktop
- –Both-side fit-out
- –Conduit carrier
- –Overhead / roof rack
- Adjustable shelving
- Lockable drawers
- Fold-flat worktop
- Both-side fit-out
- Conduit carrier
- –Overhead / roof rack
- Adjustable shelving
- Lockable drawers
- Fold-flat worktop
- Both-side fit-out
- Conduit carrier
- Overhead / roof rack
Common Questions
Electrician Van Shelving FAQ
Will it fit my van?
Every package is sized to your exact make, model and roof height, with fitment for the major US vans. Pick your van above and the parts that fit come up.
Do I need an installer?
Kits ship flat-packed with instructions and bolt in with basic tools, and most fit-outs go in within a day. If you would rather have it fitted, ask us and I will point you to an installer.
How much weight can the shelves hold?
Shelving is powder-coat steel, with heavier-duty options for equipment and supplies. Ask us for the load rating that applies to your exact configuration and we confirm it before you order.
Do you ship nationwide?
Yes. Flat-pack and pre-built systems freight nationwide, with fitment support for vans and fleets across the USA.
Still have questions? Contact our team
Get a Quote
Get a Quote for Your Van
Tell us what you drive and how you work. We will put together a shelving layout matched to your van and your electrical inventory.
