2-Bay Shelving
Open adjustable shelving for tools, bins, and everyday consumables.
- Load / shelf
- 75 kg
- Material
- Powder-coat steel
- Part
- RC-SH2
Van Shelving Systems Built for Plumbers
US Trade · PlumbersFittings sorted, PEX on the wall, torch and wrenches where you left them. RolaShelf turns your work van into a rolling supply room so every job starts stocked and ends fast.
Find Gear For Your VanPick your van
Why RolaCase
Built Around How Plumbers Work
Plumbing is a parts game. One repair can call for a dozen fittings, three pipe sizes, and the right valve buried somewhere in the back. RolaShelf gives every fitting, coil, and tool a fixed home, so you stop digging and start billing. Steel shelving, adjustable dividers, and lockable drawers keep the load tight over rough roads and long days.
Tools & Equipment
Keep the gear you reach for every job upright, contained, and easy to grab between sites.
Parts & Consumables
Bins and drawers keep parts, fittings and stock from shifting on the move and quick to restock.
Secure Storage
Lockable cabinets keep valuable tools and materials safe overnight and on site.
Built to Your Van
Sized to fit the selected van, wheelbase and roof height, so it mounts without on-site modification.
Fitment
View All
Fits the Vans Plumbers Drive
RolaShelf is cut to your make and model so shelving lines up with wheel arches, doors, and tie-down points. Tell us what you drive and we will match the layout to your van.
Configurations
All Packages
Layouts That Suit Plumbing Vans
Start from a proven plumbing layout or build your own. Every setup is modular, so you can add drawers, trays, and bins as your work changes.
Basic Van Shelving Packages
One-side shelving with bulkhead. A solid, affordable starting fit-out.
America's Most Popular Bin Package
Shelving plus parts bins, the setup most crews choose.
General Van Shelving Packages with Bulkhead
Both-side shelving with bulkhead for a fully kitted work van.
Running a Fleet?
Fitting out more than one van? We standardize layouts across your whole fleet so every tech loads out the same way and any driver can find any part. Fewer restock delays, less shrinkage, and a cleaner handover when a van changes hands.
Talk to us about fleet
Packages by Fit
Choose Your Setup
Pre-configured trade packages, from a starter run to a full mobile workshop. Pick your van above and each one fills with the parts that fit.
3-Drawer Module
Lockable drawers for hand tools and the parts you cannot lose.
- Drawers
- 3, ball-bearing
- Lock
- Keyed
- Part
- RC-DR3
Bulkhead Panel
Separates the cargo area from the cab for a safer, quieter drive.
- Fit
- Van bulkhead
- Material
- Powder-coat steel
- Part
- RC-SH2
3-Bay Shelving
More shelf runs for a bigger inventory of parts and consumables.
- Load / shelf
- 75 kg
- Material
- Powder-coat steel
- Part
- RC-SH2
3-Drawer Module
Lockable drawers for hand tools and the parts you cannot lose.
- Drawers
- 3, ball-bearing
- Lock
- Keyed
- Part
- RC-DR3
Long-Stock Carrier
Keeps lengths of conduit, timber and trunking secure and easy to pull.
- Capacity
- Up to 3 m
- Mount
- Side wall
- Part
- RC-SH2
Parts Bin Wall
Open bins keep small parts and fixings sorted and within reach.
- Mount
- Side wall
- Material
- Powder-coat steel
- Part
- RC-SH2
Both-Side Shelving
Full shelving runs down both walls for a completely kitted work van.
- Load / shelf
- 75 kg
- Material
- Powder-coat steel
- Part
- RC-SH2
3-Drawer Module
Lockable drawers for hand tools and the parts you cannot lose.
- Drawers
- 3, ball-bearing
- Lock
- Keyed
- Part
- RC-DR3
Long-Stock Carrier
Keeps lengths of conduit, timber and trunking secure and easy to pull.
- Capacity
- Up to 3 m
- Mount
- Side wall
- Part
- RC-SH2
Case Cabinet
Modular lockable cabinet keeps kits and consumables sorted and portable.
- Lock
- Keyed
- Mount
- Bulkhead
- Part
- RC-DR3
The RolaCase Difference
Why Plumbers Choose RolaCase
A shelving system only earns its keep if it survives the trade. Ours is modular, steel-built, and cut to fit your van, so it works as hard as you do.
Heavy-Duty Storage SystemsBuilt for equipment, supplies, and daily jobsite use.
Modular Fit-Out OptionsConfigure shelving, drawers, and accessories around the way your crew works.
Designed for Commercial VansOrganized layouts for the vehicles and setups trade crews rely on.
Made in Our Own FactoryPressed, welded and built in-house since 1982.
Fit for the tradeModular steel shelving, configured for plumbers
In the Field
View All Products
See Plumber Setups in Action
Fittings, Sorted
PEX On The Wall
Torch Kit In Reach
Wrenches Where They Live
Locked And Loaded
Built To Your Van
What It Holds
Storage for Every Plumbing Run
From service calls to full rough-ins, your van carries a different mix every day. These four zones cover the way plumbers actually load out.
Compare the Range
Which Setup Fits Your Run
Three fit-out tiers, from a single-side starter run to a full both-side mobile workshop. Every tier is sized to your exact van.
| The Range | Starter Single-side run | Most Popular Pro Both-side fit | Master Mobile workshop |
|---|---|---|---|
| Adjustable shelvingReconfigure shelf heights on the fly | |||
| Lockable drawersKeyed ball-bearing drawer modules | |||
| Fold-flat worktopBench that stows against the wall | – | ||
| Both-side fit-outStorage down both walls of the van | – | ||
| Conduit carrierSecure tubes for conduit and trunking | – | ||
| Overhead / roof rackLong-length gear stored up top | – | – | |
| Configure | Configure | Configure |
- Adjustable shelving
- Lockable drawers
- –Fold-flat worktop
- –Both-side fit-out
- –Conduit carrier
- –Overhead / roof rack
- Adjustable shelving
- Lockable drawers
- Fold-flat worktop
- Both-side fit-out
- Conduit carrier
- –Overhead / roof rack
- Adjustable shelving
- Lockable drawers
- Fold-flat worktop
- Both-side fit-out
- Conduit carrier
- Overhead / roof rack
Good to Know
Plumber Van Shelving Questions
Will it fit my van?
Every package is sized to your exact make, model and roof height, with fitment for the major US vans. Pick your van above and the parts that fit come up.
Do I need an installer?
Kits ship flat-packed with instructions and bolt in with basic tools, and most fit-outs go in within a day. If you would rather have it fitted, ask us and I will point you to an installer.
How much weight can the shelves hold?
Shelving is powder-coat steel, with heavier-duty options for equipment and supplies. Ask us for the load rating that applies to your exact configuration and we confirm it before you order.
Do you ship nationwide?
Yes. Flat-pack and pre-built systems freight nationwide, with fitment support for vans and fleets across the USA.
Still have questions? Contact our team
Get a Quote
Get a Quote for Your Van
Tell us the van you drive and how you work. We will map out a plumbing layout and send a quote built around your rig.
